STANDARD FEATURES
- 2x10 #2 or better Yellow Pine floor joists, 16" on center.
- 3/4" tongue and groove plywood underlayment type floor, glued and
nailed.
- 2x6 wall studs placed 16" on center, jig built and face nailed.
- Full height 8' ceilings.
40-Pound engineered snow load roof truss system installed 24" on center.
- 4-12 roof pitch, 2' overhang on soffits and 1' on gable ends.
- 5/8" OSB roof sheathing.
- 240 Lb. Asphalt roof shingles with 15 Lb. felt underlayment.
- R-19 total exterior wall insulation package.
- R-30 fiberglass Insulation In attic.
- 4' x 9' X-90 LP Smart Siding vertical with 8" grooves
- Choice of several standard front elevation window trim designs.
- Built to meet current building, plumbing, mechanical and plumbing codes.
UTILITY AND MECHANICAL FEATURES
- Natural or LP gas forced air furnaces, sized to the plan.
- 40 Gallon Natural gas fast recovery Hot Water Heater
- 200 Amp. Electric breaker panel
- 12/12 copper wire circuits with ground.
- Ground Fault Interrupt breaker outlets in Kitchen, Baths, & Exterior.
- Ample 110 volt electric outlets per Uniform Electric Code.
- Wirsbo Pex hot & cold Water Lines, soldered connections.
- Shut-off valves for all appliances at floor.
- Washer/Dryer and Range hook-up provided.
- ABS Schedule 40 Drain and Vent lines, flood tested for leaks.
- Galvanized duct lines for heat & air.
- Plumbing and Mechanical meets current building codes for single family
dwelling.
FOUNDATIONS
- Poured Concrete Crawlspace or Basement Foundations
- Completed by Advanced Systems Homes Foundation Crew
DECOR AND INTERIOR FINISH FEATURES
- Carpet In Living Room, Halls, and Bedrooms in selection of colors.
Vinyl Inlay in Kitchen, Dining Room, Utility Room, Bath Rooms and Foyers
- Selection of colors and patterns.
- Counter tops of "Formica" or in selection of patterns and
colors with back splash.
- Ceiling lights furnished and Installed in all rooms except Living Room
which has switched receptacle.
- 3-Way light switches provided for major walkways.
- Oak slab interior hollow core interior doors, stained and sealed.
- Wood Interior mill work and trim stained and sealed.
- Factory built cabinets and vanities with solid oak fronts and doors -
birch plywood boxes, stained and sealed - choice of styles and stain
colors.
- Stainless Steel enamel Kitchen Sink.
- White acrylic lavatories with mixer faucet.
- One-piece white fiberglass combination Tub/Shower and Shower units.
- Steel Insulated Exterior Doors.
- White Vinyl Single-Hung windows with screen and storm and Thermal Break
Frame - bronze finish.
- Sheetrock Walls and Ceilings, all are white. Light wall texture, and
Pebble texture on ceiling. Range Hood, white, vented through roof.
STANDARD PLANS - PRICE INFORMATION
Advanced Systems Homes maintains a file of selected plans referred to as
STANDARD. These plans contain drawings of suggested options and although
shown on the plan, they are available at additional "Option" prices.
These standard plans are pre-priced from the foundation up. Foundations
are quoted separately and may be furnished by the buyer or included in
the contract price.
A listing of some of the available options is published and Is available
from the office along with current "Base" prices of the house plans.
Both price lists are subject to change without notice. Quotes in process
are subject to change at the time of closing of the contract, and will
then become firm for construction.
Changing of the "Standard" plan in order to arrive at a "Custom" plan to
suit the buyers requirements is normal and encouraged. Part of our
customer service is providing a plan with the buyers changes at no cost,
and expect a small change or two to get it "Right". If a new plan is
required or if there are many changes, we reserve the right to charge a
reasonable rate to continue to provide plans.
An accurate plan for the customer's home is required before accurate
pricing can be determined. Once the plan is accepted, we will then also
provide a Foundation Plan, a Cabinet Plan, and a "Quote" for the cost of
the house including options. Some areas will require a much more
detailed set of plans in order to obtain a builders permit. In this
situation, an additional charge is made for the larger plan set.
We will take a look at any plan provided by the buyer to determine if It
is "Buildable" within our system. Success of adaptation and custom
design will be much greater if one of our plans can be changed to fit
the buyers requirements.
Thank you for your interest in our Homes...
|
